NAND or NOR Flash
Memory: Flash memory is a non-volatile data storing memory wafer
that involves electrically erasing and reprogramming technology. Being
non-volatile these chips are capable of storing data even in the absence of
power and are renowned for fast reading and better kinetic shock resisting
qualities. NAND devices are accessed serially, using the same eight pins to
transmit control, addressing and data. NAND flash was introduced by Toshiba in
1989.
Although NAND and NOR
memory chips function differently they are still widely being used in various
electronic devices where data storing, erasing and reprogramming are essential.
Both invented by DR. Fujio Masuoka in his work place Toshiba, the main goal was
set to outdate the old storage devices that functions under magnetic energy
like: hard disks and cassette tapes by reducing the cost per bit and increasing
maximum chip capacity.
Hence, NAND flash is
widely used in MP3 players, USB drives and digital cameras where higher storage
capacity is crucial. But, some devices like pocket PC's can be found using both
types of flash memory at the same time. These PC's typically use NAND for
memory storage and NOR to boot the operating system.
Flawed
Memory Drives and Data Recovery:
Data recovery is a
highly specialized science which is equally valid for rescuing data from both
NAND and NOR flash. Although, NOR is rarely used and is quite expensive, NAND
is preferred extensively for mass storage and a huge godsend for thin and
smaller devices.
The probability of data
loss is elevated when bad memory storage is used: unbranded USB drives,
unbranded NAND wafer devices, etc. These unbranded memory devices & chips
are often noticed in spontaneous reboots leading to program failure. A
malfunctioning RAM is often noticed to write correct data in an incorrect
location of the drive which eventually creates a data malfunction and data
loss. Furthermore, using flawed memory can also cause degradation of your hard
drives logical capability and can finally destroy your device, the most
extreme: an unbootable system or device.
Data recovery or NAND
data recovery can minimize your loss and protect your machine from any
incurable situation; we highly suggest avoiding the purchase of unbranded USB
drives, SD cards, USB sticks, CompactFlash cards, and any other no-name devices
for storing your crucial data. NAND recovery is possible but very complicated.
First
Aid Before Data Recovery:
Data loss is a common
problem that we often face due to virus attacks in our USB drives or when our
computers get physically or logically over used. To fix these data degradation
problems data recovery is only one solution that can rescue you and your data
from the nightmare of any permanent loss. But, experts believe that data loss
often becomes a complicated task when a user ignores the safety measures that
help to avoid further data losses. Thus, in case of data loss some safety
measures should be applied.
·
When data loss is
acknowledged, further procedures to retain the data should not be made. This
may lead to much more serious data loss.
·
It's better to contact
experts for help and other remedy measures.
·
Using software like:
scandisk should be completely avoided.
·
Avoid no-name or
unbranded devices.
·
eBay sellers are not
always honest eProvided (TM) has learned many times where customers data is
stored on fake NAND wafers, your purchase of a 16GB SD card may yield a soon to
be damaged 1GB NAND wafer inside.
Data Recovery for Hard Drives & NAND Storage:
Data recovery processes
embrace various techniques with latest technologies. At first, experts
determine the fault on the device and classify them into Tier 1 and Tier 2. If
your device falls into Tier 1 this means your device is suffering from a
logically damaged component and data recovery costs are normally cheaper as
compared to Tier 2. But, if your device has Tier 2 fault than your device is
physically injured and may have many internal damaged circuits which need
circuit and recovery experts; the process will normally be more costly.
After determining tier 1
or tier 2 an image of device is saved and these images are relocated to a
separate server to avoid any accidental loss. Then the original copy of the
image is transported to a lab where first degree data recovery is performed
using various utilities which may include repairing faults in the device,
dumping directly from NAND wafers, repairing circuits, crystals etc. Other
various attempts are also made which includes testing and recovering from the logical
damage on the device.
If the first degree
recovery fails then the task is considered to be severe and second degree
recovery is practiced which includes high level techniques and experts with
professional knowledge over critical uses of software and hexadecimal formulas.
These software utilities are used to re-build the drive and manipulate other
drive errors.
In case of physical
faults like: motor replacements, repairing heads or cleaning scratches
different cleaning liquids and other spare parts are available according to the
size and code. After every physical and logical recovery attempt the rescued
data is copied to an additional storage device like: CD/DVD's, flash drives,
and hard drives.
Author: Kiran Bista
Edited by Bruce Cullen
Resources: Flash Drive and Data Recovery. Memory Stick Recovery.
Resources: Flash Drive and Data Recovery. Memory Stick Recovery.
Article Source: http://EzineArticles.com/?expert=Kiran_Bista
Article Source: http://EzineArticles.com/2851257

No comments:
Post a Comment